24PinTech Wiki - User contributions [en]

User:KWahl

2020-01-23T20:17:41Z

Freyes:

dummy dumb dumb stupid nose

Logan (Retired)

2020-01-10T20:06:08Z

Freyes: /* DHCP */

==General Overview==
Logan (10.21.25.10) 1 out of 2 of the Dell PowerEdge R430's that we have in Mr. Chamberlain's room. It primarily functions as a print server, BDC (backup domain controller, a host for our DHCP/DNS backups, and a WAMP (Apache) server.

==Startup==
There is currently only 1 file in the startup folder which is a visual basic script to start up the Parsoid server. The code for that can be seen as follows:<pre>
set w = CreateObject("WScript.Shell")
w.Run chr(34) & "C:\Program Files\nodejs\parsoid\parsoid.bat" & chr(34), 0
set w = Nothing
</pre>

==Print Services==
There are currently 2 active print servers on Logan: one for the <code>Brother HL-4570CDW</code> printer, and one for the <code>HP LaserJet P4014 UPD PCL 6</code> printer.

[[File:Logan_PrintAllPrinters.png]]

Below is the advanced configuration page for both of the main printers.

[[File:Printers-advanced_logan.png|frameless|600x600px]]

==Backup Domain Controller==
Logan is a backup domain controller for Loki, meaning it is on hot standby for [[DNS]] and [[Active Directory]].

==DHCP==
Logan runs as a backup [[DHCP]] server for [[Loki]].

==WAMP Stack (Apache Server)==
Everything you need to know about our web server can be found on the [http://wiki.24pin.tech/index.php/Apache Apache] page. It covers everything ranging from installation to configuration, and covers the basics to troubleshooting.

Logan (Retired)

2020-01-10T20:05:54Z

Freyes: /* DHCP */

==General Overview==
Logan (10.21.25.10) 1 out of 2 of the Dell PowerEdge R430's that we have in Mr. Chamberlain's room. It primarily functions as a print server, BDC (backup domain controller, a host for our DHCP/DNS backups, and a WAMP (Apache) server.

==Startup==
There is currently only 1 file in the startup folder which is a visual basic script to start up the Parsoid server. The code for that can be seen as follows:<pre>
set w = CreateObject("WScript.Shell")
w.Run chr(34) & "C:\Program Files\nodejs\parsoid\parsoid.bat" & chr(34), 0
set w = Nothing
</pre>

==Print Services==
There are currently 2 active print servers on Logan: one for the <code>Brother HL-4570CDW</code> printer, and one for the <code>HP LaserJet P4014 UPD PCL 6</code> printer.

[[File:Logan_PrintAllPrinters.png]]

Below is the advanced configuration page for both of the main printers.

[[File:Printers-advanced_logan.png|frameless|600x600px]]

==Backup Domain Controller==
Logan is a backup domain controller for Loki, meaning it is on hot standby for [[DNS]] and [[Active Directory]].

==<u>DHCP</u>==
Logan runs as a backup [[DHCP]] server for [[Loki]].

==WAMP Stack (Apache Server)==
Everything you need to know about our web server can be found on the [http://wiki.24pin.tech/index.php/Apache Apache] page. It covers everything ranging from installation to configuration, and covers the basics to troubleshooting.

DHCP

2020-01-09T20:21:15Z

Freyes:

=Our DHCP Setup=

Our DHCP is run on [[Loki]] mainly, but [[Logan]] is on hot standby. DHCP is what gives out the IP addresses to the devices on our network. Without it, we would have to use static IP addresses, or we would not be able to communicate properly. Both of the servers keep each other synced on what IP addresses have been given out to ensure there are no conflicts.

==Address Pool==

Our scope is 10.21.25.0, as that is our network. The DHCP server only distributes addresses in from 10.21.25.20 to 10.21.25.247. The rest in the network are reserved for servers and printers, or anything else that needs a static IP. The following chart represents our current setup...

===Hostname IP address===
Gateway 10.21.25.1

Surtr 10.21.25.2

Loki (PDC) 10.21.25.3

Fog 10.21.25.4

Freyr 10.21.25.5

MacMini 10.21.25.6

MediaXserve 10.21.25.7

Heimdall (ESXI VM's) 10.21.25.8

Logan (BDC) 10.21.25.10

LoganWeb (VM on Logan) 10.21.25.11

Macmini Backup 10.21.25.15

NAS 24PinTech 10.21.25.16

Perle IOLAN Console Serv 10.21.25.17

Opengear 10.21.25.18

==Address Leases==

These are all of the current DHCP releases that the DHCP servers have put out that are active.

==Reservations==

This is where all of our static DHCP-side reservations for our servers, printers, NAS, etc., are located. You can double click any of them to edit their specific settings.

==Scope Options==

This is where we configure our DHCP options. To configure options that we don't already have set, right click "Scope Options" and click on "Configure Options" and configure what you need. Below are the options we already have set:

[[File:DHCP_Options.PNG]]

These options set where the computers will look for DNS, what our domain name is ([[CISCOACA.local]]) and the other options tell computers to PXE boot from [[FOG]] and configures the settings they need to boot from [[FOG]].

==Policies==

These are settings that are applied to certain devices based off of rules defined by the policy, like IP address range, vendor, etc.

The only policy we have currently configured is called UEFI, which applies to network booting via UEFI. It sets options 66 and 67 to make sure devices will boot properly off of [[FOG]]. 67 is set to ipxe.efi, and 66 is set to 10.21.25.4.

==Server Options==

This is where settings can be configured globally across the whole DHCP server. We have none of these currently configured.

==Policies (Not within scope)==

Same as above policies but global, we do not have this configured.

==Filters==

This allows you to block or allow certain MAC addresses from receiving DHCP addresses.

User:Freyes

2019-07-31T18:31:33Z

Freyes:

[[File:CIJH0069.jpg|thumb]]

File:CIJH0069.jpg

2019-07-31T18:31:20Z

Freyes:

gfdhd

Wiki Management

2019-07-31T18:24:33Z

Freyes:

==Introduction==
Managing the Wiki is pretty straightforward. This article is only for the specific tasks that you might find yourself doing as a webmaster. Anything else that you'd need to do for the Wiki can easily be found on Google, as the MediaWiki foundation has thoroughly documented their everything that you could possibly need to know. Because of this, this page is probably going to end up being pretty short.

[[File:Create account.png|left|thumb|screenshot of Special:CreateAccount]]

==Creating Users==
To create an account, go to the [[Special:CreateAccount|Create account]] page listed under [[Special:SpecialPages|Special Pages]]. If the page doesn't show, it's because your account does not have the proper role, must be an administrator or bureaucrat to create users. Refer to the next section to learn how to do this.

When you're creating an account, make sure that you check <code>Use a temporary random password and send it to the specified email address</code>. This lets the user set their own password without having to do it at your workstation, and they also are entering their email address in so that in the event that they forget their password they can reset it. If you're not using the <code>first initial + last name</code> format for usernames, putting their real name in the <code>Real name</code> field is a good idea.
[[File:User rights.png|thumb|screenshot of Special:UserRights]]

==Assigning Roles==
Just like creating an account, assigning roles is also easy. Navigate to the [[Special:UserRights|User rights]] page, enter a username, and assign the roles that you'd like that person to have. This will not work if your account doesn't have the bureaucrat role.

User:Freyes

2019-07-25T19:35:24Z

Freyes: Blanked the page

User:Freyes

2018-07-26T20:16:06Z

Freyes:

== Why I joined ==
I'm Fernando Reyes, I got into computers because I used to play games on computers with friends and they started building their computers and I thought it seemed cool so I wanted to do it too. I joined 24PinTech because I enjoyed the other computer classes that Mr.Chamberlain but I liked doing more of the hands-on work rather than doing worksheets and stuff like that so 24PinTech seemed a lot better.

User:Freyes

2018-07-26T19:54:56Z

Freyes: Created page with "== Why I joined == I joined 24PinTech because I enjoyed the other computer classes that Mr.Chamberlain but I liked doing more of the hands-on work rather than doing worksheets..."

== Why I joined ==
I joined 24PinTech because I enjoyed the other computer classes that Mr.Chamberlain but I liked doing more of the hands-on work rather than doing worksheets and stuff like that so 24PinTech seemed a lot better.