24PinTech Wiki - User contributions [en]

Midgard/UnRaid

2021-04-16T19:21:53Z

Pwaldriff: /* Troubleshooting: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==
Unraid is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can access files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

==Troubleshooting:==
This section will help aide and find solutions to any problems that can possibly occur on the server.

===Backup Did Not Complete Properly:===
If the Backup did not finish that could mean that no files or data were restored. It is also possible that some files were resotred and some were not. Here are a few soloution to this problem.

====Identifying The Data That Was Not Restored:====

#Open Windows Server Essentials, and select Computer and Backups
#Choose the Device that the backup did not complete succesfully and view the properties.
#Choose the backup that did not complete and view the details.
#The details of the backup will show green check marks on the areas that were successful in the Backup

Midgard/UnRaid

2021-04-14T18:01:04Z

Pwaldriff: /* Troubleshooting: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==
Unraid is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can access files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

==Troubleshooting:==
This section will help aide and find a soloution to any problems that can possibly occur on the server.

=== Backup Did Not Complete Properly: ===
If the Backup did not finish that could mean that no files or data were restored. It is also possible that some files were resotred and some were not. Here are a few soloution to this problem.

==== Identifying The Data That Was Not Restored: ====

# Open Windows Server Essentials, and select Computer and Backups
# Choose the Device that the backup did not complete succesfully and view the properties.
# Choose the backup that did not complete and view the details.
# The details of the backup will show green check marks on the areas that were successful in the Backup

Midgard/UnRaid

2021-04-14T17:52:30Z

Pwaldriff: /* Unraind is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can acces files through our Network. We were originally going to ESXI for our server but */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==
Unraid is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can access files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

==Troubleshooting:==
This section will help aide and find a soloution to any problems that can possibly occur on the server.

Midgard/UnRaid

2021-04-14T17:50:33Z

Pwaldriff: /* Switch Configuration When Using LACP And Port Bonding: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==

== Unraind is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can acces files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable. ==
- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

== Troubleshooting: ==
This section will help aide and find a soloution to any problems that can possibly occur on the server.

Midgard/UnRaid

2021-04-14T17:39:44Z

Pwaldriff: /* Switch Configuration When Using LACP And Port Bonding: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==
Unraind is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can acces files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

Midgard/UnRaid

2021-04-14T17:38:18Z

Pwaldriff: /* The Creation of Midgard: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==
Unraind is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can acces files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

Midgard/UnRaid

2021-04-14T17:37:07Z

Pwaldriff: /* What is Unraid: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech. A backup server is an essential for a program like 24PinTech so that we dont lose any valuable information through our database.

==What is Unraid:==
Unraind is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can acces files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc.)

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

Midgard/UnRaid

2021-04-14T17:34:13Z

Pwaldriff: /* The Creation of Midgard: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==System Information:==
CPU: 2x Intel® Xeon® CPU E5620 @ 2.40GHz

RAM:24 GiB DDR3 Single-bit ECC (max. installable capacity 384 GiB)

OS: Linux 5.10.28-Unraid x86_64

Storage: 1.4 TB SERVER storage (used as parity drive), and 9 1TB hdds (8 in a array and one acting as a cache drive)[[File:Midgard sysinfo.png|thumb|477x477px|System info reported by UnRaid|none]]

==What is Midgard:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. Midgard will help backup all sorts of data and files here at 24Pintech.

== What is Unraid: ==
Unraind is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can acces files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

- https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc.)

==The Creation of Midgard:==

#Downloaded and installed [https://unraid.net/ UnRaid].
#Tested the Raid Setup
#Added Midgard to the Domain through SMB settings.
#Rearranged the Array for the server to have a 1.4 TB parity drive using the drives in the server (NOT IN THE ARRAY), 8 1 TB Hard Drives, and a1 TB Cache Hard Drive.
#Created a new Array.
#Set and make the IP Address of the Midgard Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

Midgard/UnRaid

2021-04-14T17:28:12Z

Pwaldriff: /* The Creation of Midgard: */

Midgard/UnRaid

2021-04-08T20:25:44Z

Pwaldriff: /* Midgard Description: */

{{DISPLAYTITLE:Midgard/UnRaid}}

== System Information: ==

==Midgard Description:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database.

==The Creation of Midgard:==

#Got the Server up and running with ESXI 6.7.0.
#Make sure the server can detect the SAS Array.
#Updated the Firmware
#Transferred the OS from ESXI to UnRaid.
#Tested the Raid Setup
#Added Chad to the Domain through SMB settings.
#Rearranged the Array for the server to have 7 1 TB Hard Drives.
#Had to Change out three bad drives.
#Created a new Array.
#Changed the IP Address of the Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5:====

*Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

====Step 6:====

*Start the Back up

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

Midgard/UnRaid

2021-04-06T20:42:33Z

Pwaldriff: /* Step 5: */

{{DISPLAYTITLE:Midgard/UnRaid}}

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

==Midgard Description:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database.

==The Creation of Midgard:==

#Got the Server up and running with ESXI 6.7.0.
#Make sure the server can detect the SAS Array.
#Updated the Firmware
#Transferred the OS from ESXI to UnRaid.
#Tested the Raid Setup
#Added Chad to the Domain through SMB settings.
#Rearranged the Array for the server to have 7 1 TB Hard Drives.
#Had to Change out three bad drives.
#Created a new Array.
#Changed the IP Address of the Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup (manually):==

====Step 1:====

*Log into Odin at 10.21.25.3

====Step 2:====

*Open "Windows server backup" from the windows search bar.

====Step 3:====

*Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

====Step 4:====

*Go through the wizard until it asks what you want to back up.

====Step 5: ====

* Select "remote location option" and enter the path to the backup folder at"\\10.21.25.13\Backups"

==== Step 6: ====

* Start the Back up

Midgard/UnRaid

2021-04-06T20:29:08Z

Pwaldriff: /* Switch Configuration When Using LACP And Port Bonding */

{{DISPLAYTITLE:Midgard/UnRaid}}

==Switch Configuration When Using LACP And Port Bonding:==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

==Midgard Description:==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database.

==The Creation of Midgard:==

#Got the Server up and running with ESXI 6.7.0.
#Make sure the server can detect the SAS Array.
#Updated the Firmware
#Transferred the OS from ESXI to UnRaid.
#Tested the Raid Setup
#Added Chad to the Domain through SMB settings.
#Rearranged the Array for the server to have 7 1 TB Hard Drives.
#Had to Change out three bad drives.
#Created a new Array.
#Changed the IP Address of the Server to 10.21.25.13.
#Changed the Name of the server to Midgard.

==How to Perform a Backup:==

==== Step 1: ====

* Log into Odin at 10.21.25.3

==== Step 2: ====

* Open "Windows server backup" from the windows search bar.

==== Step 3: ====

* Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki>

==== Step 4: ====

* Go through the wizard until it asks what you want to back up.

==== Step 5: ====

Midgard/UnRaid

2021-04-06T20:13:29Z

Pwaldriff: /* Switch Configuration When Using LACP And Port Bonding */

{{DISPLAYTITLE:Midgard/UnRaid}}

==Switch Configuration When Using LACP And Port Bonding==
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.

== Midgard Description: ==
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database.

== The Creation of Midgard: ==

# Got the Server up and running with ESXI 6.7.0.
# Make sure the server can detect the SAS Array.
# Updated the Firmware
# Transferred the OS from ESXI to UnRaid.
# Tested the Raid Setup
# Added Chad to the Domain through SMB settings.
# Rearranged the Array for the server to have 7 1 TB Hard Drives.
# Had to Change out three bad drives.
# Created a new Array.
# Changed the IP Address of the Server to 10.21.25.13.
# Changed the Name of the server to Midgard.

== How to Perform a Backup: ==