Midgard/UnRaid - Revision history

BPerez: Added notes about Unraid Installation

2022-10-11T16:34:51Z

Added notes about Unraid Installation

← Older revision		Revision as of 16:34, 11 October 2022
Line 19:		Line 19:

	== How to Install Unraid:(Based on my Installation on the HP proliant DL 360 G7) ==		== How to Install Unraid:(Based on my Installation on the HP proliant DL 360 G7) ==
			#Go onto a computer and go to https://unraid.net/download and press USB creator then download for your respective OS
	# Go onto a computer and go to https://unraid.net/download and press USB creator then download for your respective OS		# After you are in the USB Creator software select your USB flash drive and select your desired Unraid "stable" version of Unraid also name the Flash drive while your in the software and that is what your server name will be.
	# After you are in the USB Creator software select your USB flash drive and select your desired Unraid "stable" version of Unraid
	# After that check UEFI boot if you have a UEFI mobo if you don't, than don't check it. after that press Write so the software writes the OS to the Flash drive		# After that check UEFI boot if you have a UEFI mobo if you don't, than don't check it. after that press Write so the software writes the OS to the Flash drive
	# Make sure to Eject the Flash Drive before removing it from the computer.		# Make sure to Eject the Flash Drive before removing it from the computer.
	# Get the server and a monitor make sure to plug ethernet, power cables, and		# Get the server and a monitor make sure to plug ethernet, power cables, and Display cables. Connect the Monitor to the server in order to configure some settings for Unraid.
			#Put the USB flash drive with Unraid on it into the server. Boot the server make sure you have everything plugged in.
			#Take the Bios out of CLI mode using this guide https://support.hpe.com/hpesc/public/docDisplay?docId=c01155651&docLocale=en_US . After the fix is applied reboot then press F9 to get into Bios
			#Configure Bios settings as told- if your booting LEGACY bios enable CSM, Enable CPU virtualization, Enable IO MMU, Set SATA mode to AHCI apply the settings you need from this list and research if you need more.
			#Set boot order to either UEFI:Flash drive or USB:Flash drive (USB is for LEGACY bios)
			#Before you boot you need to set a Static IP address use this guide start at 0:54 to 3:17 https://www.youtube.com/watch?v=domrAka9BNI use this link to pick an available IP address on the network [[DHCP]] also ask Chamberlain before assigning the IP address you choose. Use CMD on the cube in order to assign the correct Subnet mask and Default Gateway to the server.
			#Boot the server and if you're on the appropriate screen press 3. in order to boot the USB DriveKey
			#Once you boot into Unraid press enter on the first option called (Unraid OS) then once everything stops loading it should pop up with your assigned static IP address at the bottom of the page. Under IPV4 Address: 10.21.25.16 (EX)
			#After it tells you the IPV4 address you assigned go onto the cube and type into a web browser the IP address. It should pop up with Unraid login interface and then just type "root" for username and there is no default password.
	==The Creation of Midgard:==		==The Creation of Midgard:==

BPerez: Added procedures about the installation of Unraid

2022-10-11T14:50:59Z

Added procedures about the installation of Unraid

← Older revision		Revision as of 14:50, 11 October 2022
Line 16:		Line 16:
	Unraid is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can access files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.		Unraid is a Operating System that is used for Linux to store and help manage all kinds of data. Unraid helps us create arrays of drives so that all users can access files through our Network. We were originally going to ESXI for our server but the version of ESXI that was going to be utilized was incompatiable.

	- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]		- [https://www.armandgilbert.com/unraid-the-good-the-bad-the-ugly/#:~:text=unRAID%20is%20an%20OS%2C%20an,video%2C%20music%2C%20etc What is Unraid.]

			== How to Install Unraid:(Based on my Installation on the HP proliant DL 360 G7) ==

			# Go onto a computer and go to https://unraid.net/download and press USB creator then download for your respective OS
			# After you are in the USB Creator software select your USB flash drive and select your desired Unraid "stable" version of Unraid
			# After that check UEFI boot if you have a UEFI mobo if you don't, than don't check it. after that press Write so the software writes the OS to the Flash drive
			# Make sure to Eject the Flash Drive before removing it from the computer.
			# Get the server and a monitor make sure to plug ethernet, power cables, and

	==The Creation of Midgard:==		==The Creation of Midgard:==

Cburanich: /* list of installed plug-in's and dockers and what they do: */

2022-02-09T18:39:00Z

list of installed plug-in's and dockers and what they do:

← Older revision		Revision as of 18:39, 9 February 2022
Line 41:		Line 41:
	#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.		#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.
	#'''Community Applications:''' The One Stop Shop for all applications for unRaid.		#'''Community Applications:''' The One Stop Shop for all applications for unRaid.
	#'''ProFTPd:''' Allows FTP access through Midgard (https://youtu.be/dJsbBRy_JTM) Login: ftp_pintech Pass: ~~secretsaucesystemadminpass~~		#'''ProFTPd:''' Allows FTP access through Midgard (https://youtu.be/dJsbBRy_JTM) Login: ftp_pintech Pass: Medium level pass

	==Troubleshooting:==		==Troubleshooting:==

Cburanich: /* list of installed plug-in's and dockers and what they do: */

2022-02-04T18:15:42Z

list of installed plug-in's and dockers and what they do:

← Older revision		Revision as of 18:15, 4 February 2022
Line 41:		Line 41:
	#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.		#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.
	#'''Community Applications:''' The One Stop Shop for all applications for unRaid.		#'''Community Applications:''' The One Stop Shop for all applications for unRaid.
	#'''ProFTPd:''' Allows FTP access through Midgard (https://youtu.be/dJsbBRy_JTM)		#'''ProFTPd:''' Allows FTP access through Midgard (https://youtu.be/dJsbBRy_JTM) Login: ftp_pintech Pass: secretsaucesystemadminpass

	==Troubleshooting:==		==Troubleshooting:==

Cburanich: /* list of installed plug-in's and dockers and what they do: */

2022-02-04T18:13:34Z

list of installed plug-in's and dockers and what they do:

← Older revision		Revision as of 18:13, 4 February 2022
Line 41:		Line 41:
	#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.		#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.
	#'''Community Applications:''' The One Stop Shop for all applications for unRaid.		#'''Community Applications:''' The One Stop Shop for all applications for unRaid.
			#'''ProFTPd:''' Allows FTP access through Midgard (https://youtu.be/dJsbBRy_JTM)

	==Troubleshooting:==		==Troubleshooting:==

Cliermann: /* list of installed plug-in's and dockers and what they do: */

2021-10-14T20:25:25Z

list of installed plug-in's and dockers and what they do:

← Older revision		Revision as of 20:25, 14 October 2021
Line 40:		Line 40:

	#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.		#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.
	#'''Community Applications:''' The One Stop Shop for all applications for unRaid		#'''Community Applications:''' The One Stop Shop for all applications for unRaid.

	==Troubleshooting:==		==Troubleshooting:==

Cliermann: /* How to Delete A Share In UnRaid: */

2021-10-14T19:57:33Z

How to Delete A Share In UnRaid:

← Older revision		Revision as of 19:57, 14 October 2021
Line 47:		Line 47:
	===How to Delete A Share In UnRaid:===		===How to Delete A Share In UnRaid:===
	[[File:Unraid where is cmd 2.png\|thumb\|391x391px]]		[[File:Unraid where is cmd 2.png\|thumb\|391x391px]]
	~~You~~ delete a share in UnRaid if it is empty ~~though~~ the web gui, although if not empty and you don't want to delete everything through file explorer then you can do it through the command line which is located in the top right of the web gui (displayed in the image provided). Just copy paste this command into the terminal and replace the placeholder text with what share you want to remove.		To delete a share in UnRaid, if it is empty, through the web gui under the shares tab, although if not empty and you don't want to delete everything through file explorer then you can do it through the command line which is located in the top right of the web gui (displayed in the image provided). Just copy paste this command into the terminal and replace the placeholder text with what share you want to remove.
	rm -rf /mnt/user/Backups/(insert share name here)		rm -rf /mnt/user/Backups/(insert share name here)

Cliermann: /* The Community Apps Tab: */

2021-10-14T19:56:16Z

The Community Apps Tab:

← Older revision		Revision as of 19:56, 14 October 2021
Line 40:		Line 40:

	#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.		#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.
			#'''Community Applications:''' The One Stop Shop for all applications for unRaid

	==Troubleshooting:==		==Troubleshooting:==

Cliermann at 15:13, 14 October 2021

2021-10-14T15:13:51Z

← Older revision		Revision as of 15:13, 14 October 2021
Line 33:		Line 33:
	- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]		- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

	== The Community Apps Tab: ==		==The Community Apps Tab:==
	Under the apps tab, when clicked on, opens what is best described as an App Store. In this App store there are many community developed apps that can be implemented into UnRaid. They can be a docker (which is a self isolated running application without the need of hardware emulation, and uses OS emulation to run the app), or they can be a plug-in. There are a lot of different apps in this store and a lot of things we can do with them, from running a videogame server, backing up UnRaid to a google drive account, to even hosting it's own fog server locally!		Under the apps tab, when clicked on, opens what is best described as an App Store. In this App store there are many community developed apps that can be implemented into UnRaid. They can be a docker (which is a self isolated running application without the need of hardware emulation, and uses OS emulation to run the app), or they can be a plug-in. There are a lot of different apps in this store and a lot of things we can do with them, from running a videogame server, backing up UnRaid to a google drive account, to even hosting it's own fog server locally!
	[[File:Community apps.png\|thumb\|What the community apps tab looks like]]		[[File:Community apps.png\|thumb\|What the community apps tab looks like]]

	=== list of installed plug-in's and dockers and what they do: ===		===list of installed plug-in's and dockers and what they do:===

	# '''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.		#'''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.

	==Troubleshooting:==		==Troubleshooting:==

Cliermann: The Community Apps Tab

2021-10-14T15:13:27Z

The Community Apps Tab

← Older revision		Revision as of 15:13, 14 October 2021
Line 32:		Line 32:

	- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]		- [https://www.grandmetric.com/knowledge-base/design_and_configure/how-to-configure-lacp-on-cisco/ LACP Switch Configuration.]

			== The Community Apps Tab: ==
			Under the apps tab, when clicked on, opens what is best described as an App Store. In this App store there are many community developed apps that can be implemented into UnRaid. They can be a docker (which is a self isolated running application without the need of hardware emulation, and uses OS emulation to run the app), or they can be a plug-in. There are a lot of different apps in this store and a lot of things we can do with them, from running a videogame server, backing up UnRaid to a google drive account, to even hosting it's own fog server locally!
			[[File:Community apps.png\|thumb\|What the community apps tab looks like]]

			=== list of installed plug-in's and dockers and what they do: ===

			# '''Theme Engine:''' Create or import a custom color theme for the unRAID webGui.

	==Troubleshooting:==		==Troubleshooting:==
Line 69:		Line 77:
	#START THE ARRAY AND NOT WORRY ABOUT IT FOR THE NEXT 24 HOURS!!! (it'll just rebuild the drive, no biggie)		#START THE ARRAY AND NOT WORRY ABOUT IT FOR THE NEXT 24 HOURS!!! (it'll just rebuild the drive, no biggie)

	=== '''How to Update UnRaid:''' ===		==='''How to Update UnRaid:'''===
	[[File:Update OS.png\|thumb]]		[[File:Update OS.png\|thumb]]
	Go to the tools tab		Go to the tools tab

	# Go to the "tools" tab.		#Go to the "tools" tab.
	# Under the "About" section select "Update OS" depicted in the image to the right.		#Under the "About" section select "Update OS" depicted in the image to the right.
	# Select check for updates in the top right.		#Select check for updates in the top right.
	# A script will run, once it is done running hit done, and UnRaid will tell you if there is a new version or if the system is up to date.		#A script will run, once it is done running hit done, and UnRaid will tell you if there is a new version or if the system is up to date.