Sharing "Student Access" wifi with a Raspberry Pi - Revision history

Jdeegan at 15:20, 3 November 2021

2021-11-03T15:20:32Z

← Older revision		Revision as of 15:20, 3 November 2021
Line 26:		Line 26:
	#Select "Ethernet" on the drop-down that says "Select a private network connection" and hit OK		#Select "Ethernet" on the drop-down that says "Select a private network connection" and hit OK

	== Configuring the Pi ==		==Configuring the Pi==

	# Insert the SD card into the Pi and plug it in to the laptop via ethernet and USB-C		#Insert the SD card into the Pi and plug it in to the laptop via ethernet and USB-C
	# After it boots, open Command Prompt on the laptop		#After it boots, open Command Prompt on the laptop
	# arp -a to find the IP of the Pi		#arp -a to find the IP of the Pi
	# ssh pi@<IP>		#ssh pi@<IP>
	# password is raspberry		#password is raspberry
	# change the password to whatever you want with "sudo passwd pi"		#change the password to whatever you want with "sudo passwd pi"
	# update and upgrade "sudo apt update && sudo apt full-upgrade"		#update and upgrade "sudo apt update && sudo apt full-upgrade"
			#reboot
			#sudo raspi-setup
			#set the wireless location to the us
			#reboot
			#sudo apt install curl
			#curl -sL <nowiki>https://install.raspap.com</nowiki> \| bash
			#default ssid is raspui-webgui and password is ChangeMe
			#default webgui user is admin and password is secret

	#		#

Jdeegan at 16:12, 2 November 2021

2021-11-02T16:12:05Z

@@ Line 25: / Line 25: @@
 #Sharing, check "Allow other network users to connect through this computer's Internet connection"
 #Select "Ethernet" on the drop-down that says "Select a private network connection" and hit OK
+#

Jdeegan at 16:08, 2 November 2021

2021-11-02T16:08:34Z

← Older revision		Revision as of 16:08, 2 November 2021
Line 1:		Line 1:
	== Hardware ==		==Hardware==
	The hardware required includes:		The hardware required includes:

	* Raspberry Pi		*Raspberry Pi
	* Laptop with access to the "Student Access" network (Admin Required)		*Laptop with access to the "Student Access" network (Admin Required)
	* USB type C cable		*USB type C cable
	* Ethernet Cable		*Ethernet Cable
	* Micro SD Card		*Micro SD Card
	* Either a MIcro SD to SD or USB to Micro SD adapter		*Either a MIcro SD to SD or USB to Micro SD adapter

	== Setting up the SD card ==		==Setting up the SD card==

	# Insert the SD card into the laptop		#Insert the SD card into the laptop
	# Install the Raspberry Pi imaging tool (https://downloads.raspberrypi.org/imager/imager_latest.exe)		#Install the Raspberry Pi imaging tool (https://downloads.raspberrypi.org/imager/imager_latest.exe)
	# Run the imaging tool, and select Raspberry Pi OS Lite for the OS and your SD card as the media		#Run the imaging tool, and select Raspberry Pi OS Lite for the OS and your SD card as the media
	# Write the image to the drive, and remove the drive from the laptop		#Write the image to the drive, and remove the drive from the laptop

	== Setting up the laptop ==		==Setting up the laptop==

			#Open control panel
			#Network and Internet
			#Network and Sharing Center
			#Change adapter settings
			#Right click the wireless adapter, Properties
			#Sharing, check "Allow other network users to connect through this computer's Internet connection"
			#Select "Ethernet" on the drop-down that says "Select a private network connection" and hit OK

	~~# Open control panel~~
	#		#

Jdeegan at 15:18, 2 November 2021

2021-11-02T15:18:58Z

← Older revision		Revision as of 15:18, 2 November 2021
Line 1:		Line 1:
	~~With~~ the ~~recent BYOD outages, I have come~~ to ~~be sick of not being able~~ to ~~use my phone while in~~ the ~~100 building~~. ~~As a result~~, ~~I confured a~~ Raspberry Pi to ~~share~~ the ~~"Student Access" connection~~ from my laptop ~~to my phone~~		== Hardware ==
			The hardware required includes:

			* Raspberry Pi
			* Laptop with access to the "Student Access" network (Admin Required)
			* USB type C cable
			* Ethernet Cable
			* Micro SD Card
			* Either a MIcro SD to SD or USB to Micro SD adapter

			== Setting up the SD card ==

			# Insert the SD card into the laptop
			# Install the Raspberry Pi imaging tool (https://downloads.raspberrypi.org/imager/imager_latest.exe)
			# Run the imaging tool, and select Raspberry Pi OS Lite for the OS and your SD card as the media
			# Write the image to the drive, and remove the drive from the laptop

			== Setting up the laptop ==

			# Open control panel
			#

Jdeegan: Created page with "With the recent BYOD outages, I have come to be sick of not being able to use my phone while in the 100 building. As a result, I confured a Raspberry Pi to share the "Student..."

2021-11-02T15:04:14Z

Created page with "With the recent BYOD outages, I have come to be sick of not being able to use my phone while in the 100 building. As a result, I confured a Raspberry Pi to share the "Student..."

New page

With the recent BYOD outages, I have come to be sick of not being able to use my phone while in the 100 building. As a result, I confured a Raspberry Pi to share the "Student Access" connection from my laptop to my phone