Difference between revisions of "Midgard/UnRaid"
Jump to navigation
Jump to search
m (Cliermann moved page UnRaid to Midgard/UnRaid) |
|||
| Line 3: | Line 3: | ||
==Switch Configuration When Using LACP And Port Bonding== | ==Switch Configuration When Using LACP And Port Bonding== | ||
When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server. | When configuring an LACP etherchannel between a switch and UnRaid server use <code>{(C-IF-RANGE)#channel-protocol lacp}</code> on the switch and "active-backup (1)" etherchannel bond on the UnRaid server. | ||
== Midgard Description: == | |||
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database. | |||
== The Creation of Midgard: == | |||
# Got the Server up and running with ESXI 6.7.0. | |||
# Make sure the server can detect the SAS Array. | |||
# Updated the Firmware | |||
# Transferred the OS from ESXI to UnRaid. | |||
# Tested the Raid Setup | |||
# Added Chad to the Domain through SMB settings. | |||
# Rearranged the Array for the server to have 7 1 TB Hard Drives. | |||
# Had to Change out three bad drives. | |||
# Created a new Array. | |||
# Changed the IP Address of the Server to 10.21.25.13. | |||
# Changed the Name of the server to Midgard. | |||
== How to Perform a Backup: == | |||
Revision as of 20:13, 6 April 2021
Switch Configuration When Using LACP And Port Bonding
When configuring an LACP etherchannel between a switch and UnRaid server use {(C-IF-RANGE)#channel-protocol lacp} on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.
Midgard Description:
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database.
The Creation of Midgard:
- Got the Server up and running with ESXI 6.7.0.
- Make sure the server can detect the SAS Array.
- Updated the Firmware
- Transferred the OS from ESXI to UnRaid.
- Tested the Raid Setup
- Added Chad to the Domain through SMB settings.
- Rearranged the Array for the server to have 7 1 TB Hard Drives.
- Had to Change out three bad drives.
- Created a new Array.
- Changed the IP Address of the Server to 10.21.25.13.
- Changed the Name of the server to Midgard.