Difference between revisions of "Midgard/UnRaid"
Jump to navigation
Jump to search
| Line 21: | Line 21: | ||
#Changed the Name of the server to Midgard. | #Changed the Name of the server to Midgard. | ||
==How to Perform a Backup:== | ==How to Perform a Backup (manually):== | ||
==== Step 1: ==== | ====Step 1:==== | ||
* Log into Odin at 10.21.25.3 | *Log into Odin at 10.21.25.3 | ||
==== Step 2: ==== | ====Step 2:==== | ||
* Open "Windows server backup" from the windows search bar. | *Open "Windows server backup" from the windows search bar. | ||
==== Step 3: ==== | ====Step 3:==== | ||
* Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki> | *Once the windows open up on the right side of the page select "back up once option<nowiki>''</nowiki> | ||
==== Step 4: ==== | ====Step 4:==== | ||
* Go through the wizard until it asks what you want to back up. | *Go through the wizard until it asks what you want to back up. | ||
==== Step 5: ==== | ====Step 5:==== | ||
Revision as of 20:33, 6 April 2021
Switch Configuration When Using LACP And Port Bonding:
When configuring an LACP etherchannel between a switch and UnRaid server use {(C-IF-RANGE)#channel-protocol lacp} on the switch and "active-backup (1)" etherchannel bond on the UnRaid server.
Midgard Description:
The Midgard Server was designed as a backup server. This server is going to help backup files, data, applications, software, and hardware. Backups help prevent data loss and save our database.
The Creation of Midgard:
- Got the Server up and running with ESXI 6.7.0.
- Make sure the server can detect the SAS Array.
- Updated the Firmware
- Transferred the OS from ESXI to UnRaid.
- Tested the Raid Setup
- Added Chad to the Domain through SMB settings.
- Rearranged the Array for the server to have 7 1 TB Hard Drives.
- Had to Change out three bad drives.
- Created a new Array.
- Changed the IP Address of the Server to 10.21.25.13.
- Changed the Name of the server to Midgard.
How to Perform a Backup (manually):
Step 1:
- Log into Odin at 10.21.25.3
Step 2:
- Open "Windows server backup" from the windows search bar.
Step 3:
- Once the windows open up on the right side of the page select "back up once option''
Step 4:
- Go through the wizard until it asks what you want to back up.