Difference between revisions of "Sharing "Student Access" wifi with a Raspberry Pi"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== Hardware == | ==Hardware== | ||
The hardware required includes: | The hardware required includes: | ||
* Raspberry Pi | *Raspberry Pi | ||
* Laptop with access to the "Student Access" network (Admin Required) | *Laptop with access to the "Student Access" network (Admin Required) | ||
* USB type C cable | *USB type C cable | ||
* Ethernet Cable | *Ethernet Cable | ||
* Micro SD Card | *Micro SD Card | ||
* Either a MIcro SD to SD or USB to Micro SD adapter | *Either a MIcro SD to SD or USB to Micro SD adapter | ||
== Setting up the SD card == | ==Setting up the SD card== | ||
# Insert the SD card into the laptop | #Insert the SD card into the laptop | ||
# Install the Raspberry Pi imaging tool (https://downloads.raspberrypi.org/imager/imager_latest.exe) | #Install the Raspberry Pi imaging tool (https://downloads.raspberrypi.org/imager/imager_latest.exe) | ||
# Run the imaging tool, and select Raspberry Pi OS Lite for the OS and your SD card as the media | #Run the imaging tool, and select Raspberry Pi OS Lite for the OS and your SD card as the media | ||
# Write the image to the drive, and remove the drive from the laptop | #Write the image to the drive, and remove the drive from the laptop | ||
== Setting up the laptop == | ==Setting up the laptop== | ||
#Open control panel | |||
#Network and Internet | |||
#Network and Sharing Center | |||
#Change adapter settings | |||
#Right click the wireless adapter, Properties | |||
#Sharing, check "Allow other network users to connect through this computer's Internet connection" | |||
#Select "Ethernet" on the drop-down that says "Select a private network connection" and hit OK | |||
# | # | ||
Revision as of 16:08, 2 November 2021
Hardware
The hardware required includes:
- Raspberry Pi
- Laptop with access to the "Student Access" network (Admin Required)
- USB type C cable
- Ethernet Cable
- Micro SD Card
- Either a MIcro SD to SD or USB to Micro SD adapter
Setting up the SD card
- Insert the SD card into the laptop
- Install the Raspberry Pi imaging tool (https://downloads.raspberrypi.org/imager/imager_latest.exe)
- Run the imaging tool, and select Raspberry Pi OS Lite for the OS and your SD card as the media
- Write the image to the drive, and remove the drive from the laptop
Setting up the laptop
- Open control panel
- Network and Internet
- Network and Sharing Center
- Change adapter settings
- Right click the wireless adapter, Properties
- Sharing, check "Allow other network users to connect through this computer's Internet connection"
- Select "Ethernet" on the drop-down that says "Select a private network connection" and hit OK