24PinTechSwitch Config

From 24PinTech Wiki
Revision as of 19:33, 17 September 2024 by BPerez (talk | contribs) (Current running configuration of the main switch for the CTE network as of 9/17/24)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Running Configuration

24PinTech_Switch#show run

Building configuration...

Current configuration : 10730 bytes !!

Last configuration change at 15:39:09 UTC Tue Sep 17 2024 by 24PinTech!

version 16.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

no platform punt-keepalive disable-kernel-core !

hostname 24PinTech_Switch !!

vrf definition Mgmt-vrf !

address-family ipv4

exit-address-family !

address-family ipv6

exit-address-family !

enable secret 5 $1$bibk$uwpxgKcUpBT0Qz.R1EfA50 !

no aaa new-model

switch 1 provision ws-c3650-24ps !!!!!!!!!!!!!!!!!

shutdown vlan 99 !

crypto pki trustpoint TP-self-signed-833429682

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-833429682

revocation-check none

rsakeypair TP-self-signed-833429682 !!

crypto pki certificate chain TP-self-signed-833429682 !

license boot level ipbasek9

diagnostic bootup level minimal !

spanning-tree mode rapid-pvst

spanning-tree extend system-id

no spanning-tree vlan 25 !!

username 24pintech privilege 15 password 7 03291A08345F6C6D7031395743025A0230792                                                                                                                                                             80C !

redundancy

mode sso !!!

class-map match-any system-cpp-police-topology-control

  description Topology control

class-map match-any system-cpp-police-sw-forward

  description Sw forwarding, SGT Cache Full, LOGGING

class-map match-any system-cpp-default

  description DHCP snooping, show forward and rest of traffic

class-map match-any system-cpp-police-sys-data

  description Learning cache ovfl, Crypto Control, Exception, EGR Exception, NFL                                                                                                                                                              SAMPLED DATA, Gold Pkt, RPF Failed

class-map match-any system-cpp-police-punt-webauth

  description Punt Webauth

class-map match-any system-cpp-police-forus

  description Forus Address resolution and Forus traffic

class-map match-any system-cpp-police-multicast-end-station

  description MCAST END STATION

class-map match-any system-cpp-police-multicast

  description Transit Traffic and MCAST Data

class-map match-any system-cpp-police-l2-control

  description L2 control

class-map match-any system-cpp-police-dot1x-auth

  description DOT1X Auth

class-map match-any system-cpp-police-data

  description ICMP_GEN and BROADCAST

class-map match-any system-cpp-police-control-low-priority

  description ICMP redirect and general punt

class-map match-any system-cpp-police-wireless-priority1

  description Wireless priority 1

class-map match-any system-cpp-police-wireless-priority2

  description Wireless priority 2

class-map match-any system-cpp-police-wireless-priority3-4-5

  description Wireless priority 3,4 and 5

class-map match-any non-client-nrt-class

class-map match-any system-cpp-police-routing-control

  description Routing control

class-map match-any system-cpp-police-protocol-snooping

  description Protocol snooping !

policy-map port_child_policy

class non-client-nrt-class

  bandwidth remaining ratio 10

policy-map system-cpp-policy

class system-cpp-police-data

  police rate 200 pps

class system-cpp-police-sys-data

  police rate 100 pps

class system-cpp-police-sw-forward

  police rate 1000 pps

class system-cpp-police-multicast

  police rate 500 pps

class system-cpp-police-multicast-end-station

  police rate 2000 pps

class system-cpp-police-punt-webauth

class system-cpp-police-l2-control

class system-cpp-police-routing-control

  police rate 1800 pps

class system-cpp-police-control-low-priority

class system-cpp-police-wireless-priority1

class system-cpp-police-wireless-priority2

class system-cpp-police-wireless-priority3-4-5

class system-cpp-police-topology-control

class system-cpp-police-dot1x-auth

class system-cpp-police-protocol-snooping

class system-cpp-police-forus

class system-cpp-default !!!!!!!!!!!!!!

interface Port-channel1

description Ports: 9, 10, 11, 12 to Asgard

switchport access vlan 25

switchport mode access !

interface Port-channel2

description Ports: 3, 4, 5, 6 to Valhalla

switchport access vlan 25

switchport mode access !

interface Port-channel3

description Ports: 1, 2 to School Network

switchport trunk allowed vlan 25

switchport mode trunk !

interface Port-channel4

description Ports 13,14,15,16 to Charlie

switchport access vlan 25

switchport mode access !

interface Port-channel5

description Ports: 17, 18, 19, 20 to Open

switchport access vlan 25

switchport mode trunk !

interface Port-channel6

description Ports: 21, 22, 23, 24 to Alpha

switchport access vlan 25

switchport mode access !

interface GigabitEthernet0/0

vrf forwarding Mgmt-vrf

no ip address

negotiation auto !

interface GigabitEthernet1/0/1

description Ports: 1, 2 to School Network

switchport trunk allowed vlan 25

switchport mode trunk

channel-group 3 mode active !

interface GigabitEthernet1/0/2

description Ports: 1, 2 to School Network

switchport trunk allowed vlan 25

switchport mode trunk

channel-group 3 mode active !

interface GigabitEthernet1/0/3

description Ports: 3, 4, 5, 6 to Valhalla

switchport access vlan 25

switchport mode access

channel-group 2 mode on !

interface GigabitEthernet1/0/4

description Ports: 3, 4, 5, 6 to Valhalla

switchport access vlan 25

switchport mode access

channel-group 2 mode on !

interface GigabitEthernet1/0/5

description Ports: 3, 4, 5, 6 to Valhalla

switchport access vlan 25

switchport mode access

channel-group 2 mode on !

interface GigabitEthernet1/0/6

description Ports: 3, 4, 5, 6 to Valhalla

switchport access vlan 25

switchport mode access

channel-group 2 mode on !

interface GigabitEthernet1/0/7

description OPEN

switchport access vlan 25

switchport mode access !

interface GigabitEthernet1/0/8

description OPEN

switchport access vlan 25

switchport mode access !

interface GigabitEthernet1/0/9

description Ports: 9, 10, 11, 12 to Asgard

switchport access vlan 25

switchport mode access

channel-group 1 mode on !

interface GigabitEthernet1/0/10

description Ports: 9, 10, 11, 12 to Asgard

switchport access vlan 25

switchport mode access

channel-group 1 mode on !

interface GigabitEthernet1/0/11

description Ports: 9, 10, 11, 12 to Asgard

switchport access vlan 25

switchport mode access

channel-group 1 mode on !

interface GigabitEthernet1/0/12

description Ports: 9, 10, 11, 12 to Asgard

switchport access vlan 25

switchport mode access

channel-group 1 mode on !

interface GigabitEthernet1/0/13

description Ports 13,14,15,16 to Charlie

switchport access vlan 25

switchport mode access

channel-group 4 mode active !

interface GigabitEthernet1/0/14

description Ports 13,14,15,16 to Charlie

switchport access vlan 25

switchport mode access

channel-group 4 mode active !

interface GigabitEthernet1/0/15

description Ports 13,14,15,16 to Charlie

switchport access vlan 25

switchport mode access

channel-group 4 mode active !

interface GigabitEthernet1/0/16

description Ports 13,14,15,16 to Charlie

switchport access vlan 25

switchport mode access

channel-group 4 mode active !

interface GigabitEthernet1/0/17

description Ports 17,18,19,20 to Open

switchport access vlan 25

switchport mode access

channel-group 5 mode active !

interface GigabitEthernet1/0/18

description Ports 17,18,19,20 to Open

switchport access vlan 25

switchport mode access

channel-group 5 mode active !

interface GigabitEthernet1/0/19

description Ports 17,18,19,20 to Open

switchport access vlan 25

switchport mode access

channel-group 5 mode active !

interface GigabitEthernet1/0/20

description Ports 17,18,19,20 to Open

switchport access vlan 25

switchport mode access

channel-group 5 mode active !

interface GigabitEthernet1/0/21

description connecton to Alpha

switchport access vlan 25

switchport mode access

channel-group 6 mode on

!

interface GigabitEthernet1/0/22

description connecton to Alpha

switchport access vlan 25

switchport mode access

channel-group 6 mode on

!

interface GigabitEthernet1/0/23

description connecton to Alpha

switchport access vlan 25

switchport mode access

channel-group 6 mode on !

interface GigabitEthernet1/0/24

description connecton to Alpha

switchport access vlan 25

switchport mode access

channel-group 6 mode on !

interface GigabitEthernet1/1/1 !

interface GigabitEthernet1/1/2 !

interface GigabitEthernet1/1/3 !

interface GigabitEthernet1/1/4 !

interface Vlan1

no ip address

shutdown !

interface Vlan25

description Used to create active SVI

ip address 10.21.25.28 255.255.255.0 !

interface Vlan99

description Management VLAN for CISCOACA.local domain

no ip address !

ip default-gateway 10.21.25.1

ip forward-protocol nd

ip http server

ip http authentication local

ip http secure-server !

ip access-list extended AutoQos-4.0-wlan-Acl-Bulk-Data

permit tcp any any eq 22

permit tcp any any eq 465

permit tcp any any eq 143

permit tcp any any eq 993

permit tcp any any eq 995

permit tcp any any eq 1914

permit tcp any any eq ftp

permit tcp any any eq ftp-data

permit tcp any any eq smtp

permit tcp any any eq pop3

ip access-list extended AutoQos-4.0-wlan-Acl-MultiEnhanced-Conf

permit udp any any range 16384 32767

permit tcp any any range 50000 59999

ip access-list extended AutoQos-4.0-wlan-Acl-Scavanger

permit tcp any any range 2300 2400

permit udp any any range 2300 2400

permit tcp any any range 6881 6999

permit tcp any any range 28800 29100

permit tcp any any eq 1214

permit udp any any eq 1214

permit tcp any any eq 3689

permit udp any any eq 3689

permit tcp any any eq 11999

ip access-list extended AutoQos-4.0-wlan-Acl-Signaling

permit tcp any any range 2000 2002

permit tcp any any range 5060 5061

permit udp any any range 5060 5061

ip access-list extended AutoQos-4.0-wlan-Acl-Transactional-Data

permit tcp any any eq 443

permit tcp any any eq 1521

permit udp any any eq 1521

permit tcp any any eq 1526

permit udp any any eq 1526

permit tcp any any eq 1575

permit udp any any eq 1575

permit tcp any any eq 1630

permit udp any any eq 1630

permit tcp any any eq 1527

permit tcp any any eq 6200

permit tcp any any eq 3389

permit tcp any any eq 5985

permit tcp any any eq 8080 !!!

control-plane

service-policy input system-cpp-policy !

banner motd ^CAuthorized personnel only! Violators will be subject to the wrath of Chambie!^C !

line con 0

password 7 080078764D4B554742

logging synchronous

login

stopbits 1

line aux 0

stopbits 1

line vty 0 4

password 7 080878764A4A554742

logging synchronous

login local

line vty 5 15

password 7 080878764A4A554742

logging synchronous

login !!

wsma agent exec !

wsma agent config !

wsma agent filesys !

wsma agent notify !!

ap dot11 airtime-fairness policy-name Default 0

ap group default-group

ap hyperlocation ble-beacon 0

ap hyperlocation ble-beacon 1

ap hyperlocation ble-beacon 2

ap hyperlocation ble-beacon 3

ap hyperlocation ble-beacon 4

end

Notes:

When running an UnRaid server the normal {(C-IF)#channel-group on}command may NOT work, instead use {(C-IF)#channel-protocol lacp}to independently force LACP on all ports in range. (THIS WILL USUALLY BE NEEDED WHEN USING BOND MODE "ACTIVE-BACKUP (#)" ON UNRAID.)