Procedures

Work Order Procedure (Technician)

This procedure is to used by technicians that have a work order. This is the correct way to handle the work order, and this procedure must be followed every single time.

1. Log into Spiceworks, which is located here.
2. Check Spiceworks DAILY.
3. If you have a new work order, immediately comment "Work Order Received" or something similar to alert the manager that you have seen the work order.
4. If you are working with another tech on the work order, talk to them before doing anything and come to a consensus on what should be done.
5. Email any customers that are assigned on your work order.
6. Set up a time for them to drop your device off, or pick it up for them. Whatever suits the customer is what suits you.
7. After picking up any devices, please email your customer and ask for permission to disassemble, if it applies. Written permission is required.
8. Update customers every 2 days at most via email.
9. Email a customer when their device(s) is/are ready for pickup.
10. Set up a time for them to pick up a device or drop the device off when it is done, depending on the device and customer. Every case will be different.
11. Once the device is no longer in the hands of 24PinTech, notify the manager that the work order is completed. One week after the the device has left 24PinTech, a follow-up email (see Email Templates) needs to be sent.